Get simple instructions on Brother HL L3290CDW Setup & connect it to wifi. Brother MFC J895dw driver & manual download. For, more queries reach us & get guidance. Read more https://printerdriver.us/brother/brother-hl-l3290cdw
Guidance For Brother Hl L3290cdw
Brother HL L3290CDW is a digital color printer with print, copy, and scanning functions.
It provides laser prints with good quality. The printer has a duplex printing capability,
which saves your work time. You can also connect this Brother printer to your Wi-Fi
network and print easily from your computer without the need for hassle cables. Carry
out these below-mentioned steps on Brother Hl L3290cdw setup.
Step 1: Unpacking the printer
First, take out the printer from the carton and place it in a location away from
Remove all the packing materials like tapes and plastic films from the printer.
The components included in the printer package consist of the following.
Drum unit and Toner cartridge assemblies
AC Power cord
Quick Setup Guide
Product Safety Guide
Step 2: Installing the toner cartridge
Open the cartridge door and remove the packing materials.
Take out the pre-installed toner cartridges and waste toner box.
Unpack the toner cartridge and remove the orange shipping material.
Shake the cartridge before inserting it and fix it to the printer.
Follow the color codes and install all the toner cartridges into the printer. Then,
close the cartridge door.
Use this steps to configure the Brother Hl L3290cdw Setup.
Step 3: Loading paper
Pull out the input paper tray at the bottom of the printer.
Remove and any packing materials and slide the paper guides towards the
edges of the tray.
Fan a paper stack and tap them on a flat surface before loading it.
Insert the paper stack into the input paper tray.
Make sure that the loaded paper doesn't exceed the maximum paper mark.
Insert the tray inside the printer to fix it firmly.
Step 4: Configuring the printer
Connect the power cord to the rear side of the printer. Then, plug in the other end
to an electrical outlet.
Turn on the printer by touching the Power button on the control panel of the