319.10
Section 1 — Chemical Product and Company Identification
Section 2 — Composition, Information on Ingredients
Epoxy Paint Component A
Xylene (1330-20-7) 7.5%, Toluene (108-88-3) 7.5%, Methyl Isobutyl Ketone (108-10-1) 35%,
Silicon Dioxide (112926-00-8) 10%, Epoxy Resin Solution (N/A) 40%
Section 3 — Hazards Identification
Call a physician, seek medical attention for further treatment, observation and support after first aid.
Inhalation: Remove to fresh air at once. If breathing has stopped give artificial respiration immediately.
Eye: Immediately flush with fresh water for 15 minutes.
External: Wash continuously with fresh water for 15 minutes.
Internal: Give large quantities of water. Call a physician or poison control at once.
Section 4 — First Aid Measures
Section 7 — Handling and Storage
Avoid contact with eyes, skin and clothing. Wear chemical splash goggles, chemical-resistant gloves and chemical-resistant apron.
Use ventilation to keep airborne concentrations below exposure limits. Always wear a NIOSH-approved respirator with proper
cartridges or a positive pressure, air-supplied respirator when handling this material in emergency situations (spill or fire).
Clear Liquid, Sweet Odor.
Moderately toxic by ingestion, inhalation and skin absorption. Harmful vapor to eyes, skin and mucous
membranes. Avoid breathing vapor and contact with all body tissues.
Flammable liquid.
Section 5 — Fire Fighting Measures
Flammable liquid.
Flash Point 60 F
Fire Fighting Instructions: Use triclass, dry chemical fire extinguisher. Firefighters should wear PPE
and SCBA with full facepiece operated in positive pressure mode.
Section 6 — Accidental Release Measures
Restrict unprotected personnel from area. Remove all ignition sources and ventilate area. Contain spill with sand and absorbent
material, neutralize with sodium bicarbonate or calcium hydroxide and deposit in sealed bag or container. See Sections 8 and 13 for
further information.
Section 8 — Exposure Controls , Personal Protection
Flinn Suggested Chemical Stor