TECHNICAL DATA SHEET
Elastomeric Liquid Membrane
Physical Properties: Complies with CAN/CGSB-37.58
-Solids by Weight
6 gal/100ft2 (approx.)
for 2.25 mm (90 mils)
minimum wet thickness.
@ 45% R.H. 77°F
41°F minimum preferred
-Shore A Hardness
Minus 40°F to 185ºF
Non-resistant to oils or
solvents. Resists mild acids,
alkalis, salt and calcium
@ 2.25 mm (90 mils)
Aqua-Bloc® SB is a one component elastomeric waterproofing compound designed to replace conventional hot mop felt ply and/or pre-
formed sheeting systems. It is applied in a single application, which cures through solvent evaporation to provide a heavy-duty
“seamless” rubber-like, impervious membrane.
-Seamless rubberized asphalt membrane.
-Excellent adhesion to most construction surfaces such as concrete, stone, wood, cement and metal.
-Retains flexibility over wide temperature range.
-Cold applied requires no special equipment, such as kettles.
-Resistant to mild acid, alkalis, salt and calcium chloride solutions.
-Easily transported to small or “hard to get at” applications.
Aqua-Bloc® SB may be used for above, on, and below grade installation for waterproofing parking decks, tunnels, planters, mechanical
rooms, reflective pools and foundation walls. Excellent compound to repair hot rubberized asphalt membranes such as 790-11.
Aqua-Bloc SB is packaged in 5 gallon pails.
Henry Company 2911 Slauson Avenue, Huntington Park, CA 90255