PADDOCK POOL EQUIPMENT COMPANY
1
DECK EQUIPMENT – LIFEGUARD CHAIRS
G. DECK EQUIPMENT
All deck equipment and the Pool Contractor shall furnish related accessories specified herein. Installation shall be by the Pool Contractor unless
otherwise dictated by the project drawings. Paddock Pool Equipment Company, Inc., of Rock Hill, South Carolina, shall supply the deck equipment and
related accessories. Substitutions may be considered if offered according to the conditions set forth in the appropriate section of these specifications.
Products offered by a company not regularly engaged in the manufacture of such equipment shall not be acceptable for this project. The deck equipment
shall be guaranteed for a period of one year against defects in workmanship or material.
G. 6 FT PORTABLE LIFEGUARD CHAIR, PADDOCK MODEL _______
The lifeguard chair shall be portable and shall have a molded fiberglass seat installed 6’-1½ ” above the deck. The frame of the chair shall be welded and
shall be fabricated of 1.9 O.D. x .065” wall & .083” wall Type 304 stainless steel tubing with a 320 grit finish. Frames, which are bolted together, shall not
be acceptable. The framework shall move across the deck on 2” x 4” diameter polyofin wheels installed on ¾” stainless steel axle assemblies. The
platform rails shall be fabricated entirely of stainless steel and extruded PVC “I” beam sections. The surface of the extruded PVC sections shall be
serrated to form a non-skid surface. The top surface sections shall be 5/8” wide and the space between extruded sections shall not exceed 1/8”. A 15-
degree sloping ladder shall reach the platform, which is 19" wide. The bottom of the ladder and back rails shall be fitted with white rubber bumpers, which
shall bear on the deck. The ladder treads shall be stainless steel 19" long x 4" wide with a slip-resistant surface. The lifeguard chair shall be supplied
with an umbrella socket fabricated of Type 304 stainless steel integral to the stainless steel framework on one