- 2 -
F O R E W O R D
◎ According to KCM’s continuous effort to improve the
product quality, descriptions in the Parts Catalog may
be slightly different from your machine. If any
questionable points are found, feel free to contact your
nearest KCM dealer.
◎ For the engine parts, please refer to the parts catalog
of diesel engine issued separately.
1. HOW TO ORDER PARTS
When ordering parts, please specify the following
(2) Product Identification Number
(3) Part No.
(4) Part Name
(6) Purchaser's Name and Address
2. HOW TO USE THIS PARTS CATALOG
PART NAME: When the part is used as an inner part
of an assembly part, the mark ”” is
shown in front of the part name.
Indicates the number of the part used
per machine. The quantity of an inner
part is the number of the inner part
necessary to organize one assembly
SYMBOLS USED IN THIS BOOK:
The symbols shown in the service code and
interchangeability columns are used to indicate
the following information.
W: Requires additional processing at the job
site. Ask your nearest KCM dealer.
Indicate a precise part. Ask your nearest
KCM dealer for its repair.
Impossible to replace as a single part.
Replace the part in an assembly unit.
K: Contained in the service part kit.
Indicate that the quantity of the part like
shims differs depending on the machine
To be supplied as repair or service parts.
Engine related parts.
OS: Over-sized parts
US: Undersized parts
(Part with mark “OS, or US” is described in
the next column under the standard size
Indicates newly added parts to the
equipment or component.
Interchangeable part without any
Used to indicate the part No. and quantity
of the part to be used for the part
concerned in the replacement part column.
However, the part concerned is not used
for the part shown with mark I.
Becomes interchangeable when
Indicate the part prohibited to