Here, we provide simple instructions for the Epson WF 2860 Setup. Get free download driver for Windows, Mac, Manual. For, remote solutions reach us & get guidance. Read more https://printerdriver.us/epson/epson-wf-2860
Epson Wf 2860 Setup
Epson WF 2860 is an All-in-One wireless color printer with scanning, printing, and
copying functions. It has a 150-sheet input paper tray and a 2.4” color touchscreen. You
can easily print in duplex and scan multiple pages using the ADF feeder on the printer.
The printer also supports a wired network and a direct USB connection. You can also
print from your smartphone by installing the Epson application. The printer also supports
the AirPrint feature that allows you to print from any iOS device without installing the
printer software. Carry ou these below-mentioned steps the Epson Wf 2860 Setup.
To set up the Epson printer, proceed with the steps that are given below.
Step 1: Unpacking the printer
First, take out the printer from the carton box and place it on a location that is
away from direct sunlight.
Remove the packing tapes and protective films from the printer.
Open the scanner unit and dispose of the tapes present inside the printer. Then,
close the scanner unit.
Check the components of the printer included in the package, which consists of
Step 2: Configure the printer
Connect the power cord to the rear side of the Epson printer.
Plug in the other end of the power cord to an electrical outlet.
Raise the control panel of the Epson printer to a convenient angle.
Turn on the printer and set the initial settings on the printer.
Set the language and country using the touchscreen display. Then, select the
date and time.
Using these steps we can execute the Epson Wf 2860 Setup.
Step 3: Installing ink cartridges
Raise the scanner unit and leave it when it locks into place.
Now, unpack the black ink cartridge.
Gently shake the ink cartridge and remove the yellow tape from it.
Make sure not to touch the contacts on the ink cartridge as it may affect the print
Insert the black ink cartridge into the right slot and press it down until it makes a