Material Safety Data Sheet
Telephone # (s):
Safety Information: (800) 828-6571
Health Emergency: (585) 422-2177
Rochester, NY 14644
Transportation Emergency (Chemtrec): (800) 424 – 9300
Section I - Product Identification
Trade Names/Synonyms: 2510/2511/2515/2515 EO/2520/2520 EO/
WH: 5R152*, 5R170, 5R178, 5R310;
3001/3030/3040/3050/3050 EO/3050 FX/
5R611, 5R90245, 502S31600
3060/8233/8825/8825 I/8825 II/8825 DDS/
XL: 5R90179, 5R328
8830/8830 DDS/8836 Developer
This is not a WHMIS controlled product.
Ingredients(% by wt.)
Iron powder (>90%)
Styrene/acrylate polymer (<4%)
Acrylic resin (<2%)
Section II - Emergency and First Aid
Primary Route of Entry:
Symptoms of Overexposure:
Minimal respiratory tract irritation may occur as
with exposure to large amounts of any non-toxic dust.
Flush with water.
Medical Conditions Generally Aggravated by Exposure:
Wash with soap and water.
None when used as described by product literature.
Remove from exposure.
Dilute stomach content with several glasses of water.
Section III - Toxicology and Health Information
The toxicology of this developer has been evaluated by Xerox Corporation. Data presented in this section is based on the test results
of the toner or similar reprographic toners. The major component is not included due to its toxicological inertness and large particle
>5 g/kg (rats)
10 mg/m3 (total dust)
>5 g/kg (rabbits)
15 mg/m3 (total dust)
>5 mg/l (rats, 4 hr exposure)
5 mg/m3 (respirable dust)