MATERIAL SAFETY DATA SHEET
The information contained in this form is based on data from sources considered to be reliable but Irving Oil Limited does not guarantee the accuracy or completeness thereof. The
information is provided as a service to the persons purchasing or using the material to which it refers and Irving Oil Limited expressly disclaims all liability for loss or damage including
consequential loss or for injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
Page 1 of 2
SECTION 1 - PRODUCT IDENTIFICATION AND USE
Supplier Name and Address:
10 Sydney Street
Saint John, N.B.
SECTION 2 - HAZARDOUS INGREDIENTS OF MATERIALS
5 mg/m3 (oil
SECTION 3 - PHYSICAL DATA AND CHEMICAL PROPERTIES
Vapour Pressure (mm @ 68o F 20oC):
Viscosity (cSt @ 212o F 100oC):
Specific Gravity @ 15oC: 0.85
SECTION 4 - FIRE AND EXPLOSION HAZARD
Open flame above flash point.
Flash Point : 196oC 385o F (PMCC)
Upper Flammable Limit:
Lower Flammable Limit:
Auto Ignition Temperature:
TDG Flammability Classification:
Sensitivity to Impact:
Sensitivity to Static Discharge:
Means of Extinction:
Dry chemical, water spray (fog), foam or carbon dioxide.
Hazardous Combustion Products:
Hydrogen sulphide and oxides of carbon, nitrogen, sulphur and phosphorus.