Hazard Rating HMIS NFPA
Formerly Paulsen & Roles Laboratories
10000 SW Commerce Circle
Wilsonville, OR 97070
Office PHONE: 503-416-5300 or FAX 503-416-5301
24-HR EMERGENCIES: MEDICAL 800-808-4691 DOT CHEMTREC: 800-424-9300
MATERIAL SAFETY DATA SHEET
Complies with ANSI Z400.1 Format
SECTION 1: PRODUCT IDENTIFICATION
Product: Saniquat 512 Disinfectant SanitizerTM MSDS CODE: CL0470.0204
EPA Registration No. 1839-86-1802
EPA Registered Product
None Regulatory Affairs Department
SECTION 2: COMPOSITION AND INFORMATION ON INGREDIENTS
% by Wt.
n-Alkyl Dimethyl Benzyl Ammonium Chlorides
n-Alkyl Dimethyl Ethylbenzyl Ammonium Chlorides
Balance is water and similar non-hazardous ingredients.
NA = Not applicable NSR = No Special Requirements ND = Not Determined PEL = OSHA TLV-TWA = ACGIH
SECTION 3: HAZARD IDENTIFICATION
Primary Entry Routes: Inhalation. Skin contact. Eye contact. Signs & Symptoms of Exposure: Corrosive. Direct contact
of product with eyes or skin may cause eye and skin burns. Prolonged or repeated contact of product with skin and eye
may cause eye and skin burns. Harmful if swallowed. If taken internally, product may cause irritation to mouth, throat or
Effects of Overexposure: Individuals with chronic respiratory disorders such as asthma, chronic bronchitis, emphysema,
etc., may be more susceptible to irritating effects.
SECTION 4: FIRST AID MEASURES
Emergency First Aid Procedures: Eye Contact: Hold eye open and rinse slowly and gently with water for 15-20 minutes.