Service Repair Manual
938G II Wheel Loader
Product: WHEEL LOADER
Model: 938G II WHEEL LOADER RTB
Configuration: 938G II Wheel Loader RTB00001-UP (MACHINE) POWERED BY 3126B Engine
Disassembly and Assembly
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power
Media Number -RENR6068-03
Publication Date -01/12/2008
Date Updated -19/12/2008
Axle Housing - Disassemble
SMCS - 3260-015
Tool Part Number
Transmission Repair Stand
Spanner Wrench As(1)
Spanner Wrench As(2)
938G II Wheel Loader RTB00001-UP (MACHINE) POWERED BY 3126B Engine(S...
(1) For use with M105 bearing nut.
(2) For use with M95 bearing nut.
a. Remove the fixed axle. Refer to Disassembly and Assembly, "Fixed Axle (Front) - Remove
b. Remove the oscillating axle. Refer to Disassembly and Assembly, "Oscillating Axle (Rear) -
Note: The axle housing assemblies that are used in the front fixed axle and in the rear
oscillating axle are similar. Therefore, both axle housing assemblies can be removed in the
1. Install the axle housing in a vertical position on Tooling (B).
Note: Carefully remove the axle housing assembly. Part of the wear gauge pin will remain
in the axle housing assembly. The pin will remain in the axle housing assembly. The spring
and the piston will remain in the differential housing.
2. Fasten Tooling (A) and a hoist to the rim of the axle shaft, as shown. Remove bolts (1) tha