Rev. 1 - 07/99
Aluminum Panel and
The Alpha Communications® OF200 series panel
and annunciator frames are made of heavy gauge
extruded aluminum, in a natural (clear) anodized
They are used primarily with nurse-call and emer-
gency-call annunciator master stations, but are also
used with a variety of apartment entry intercom and
video intercom lobby panel modules.
For flush mounting, the OF200 series can be used by
itself, or with the matching OH200 series flush back
box/housing. For surface mounting, the OF200 se-
ries requires the matching OH300 series surface
NOTE: All models are 17.75"H (451mm)
Surface models are 4.00"D (102mm) when
used with the OH300 series surface box
Flush models are .38"D (10mm)
off of finished wall surface
1 Gang 6.25"W (159mm)
2 Gang 10.25"W (261mm)
3 Gang 14.25"W (362mm)
4 Gang 18.25"W (464mm)
5 Gang 22.25"W (566mm)
6 Gang 26.25"W (667mm)
7 Gang 30.25"W (769mm)
8 Gang 34.25"W (870mm)
9 Gang 38.25"W (972mm)
10 Gang 42.25"W (1074mm)
12 Gang 50.25"W (1277mm)
Copyright© 1999-2000, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: firstname.lastname@example.org
Due to continuous product improvement, all colors, sizes, materials,
finishes and specifications are subject to change without notice.
OF201 (1 module)
Panel Frame (shown)
ARCHITECTS' AND ENGINEERS'
The OF200 annunciator/panel frame(s) shall be
Alpha Communications®/Tektone model OF20x
or approved equal (x=number of panel modules).
It shall be made of heavy gauge extruded alumi-
num in a natural (clear) anodized finish.
For flush mounting, contractor shall provide the
required OH20x series flush housing, if required
(x=number of panel modules).
For surface mountin