Page 1 of 2
MATERIAL SAFETY DATA SHEET
MAY BE USED TO COMPLY WITH OSHA'S HAZARD COMMUNICATION STANDARD, 29 CFR 1910.1200
AND SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT (SARA) OF 1986 PUBLIC LAW 99-499.
STANDARD SHOULD BE CONSULTED FOR SPECIFIC REQUIREMENTS.
SUPPLIERS NAME: N94 W14355 Garwin Mace Drive
Menomonee Falls, WI 53051 USA
ABRACOR ® Brush-On - Hardener (Curing Agent) -
PRODUCT CLASSIFICATION: Wear Resistant Composite
IMPORTANT: This section covers the materials from which these products are manufactured. The fumes and gases
produced during normal use of these products are covered in Section V. The term "Hazardous" in "Hazardous
Ingredients" should not only be interpreted as a term required and defined in OSHA Hazard Communication Standard (29
CFR Part 1910.1200), but also as defined by other regulatory agencies. The chemicals or compounds subject to reporting
under Title III, in Section 313, of the Superfund Amendments and Reauthorization Act (SARA) are marked by the
1. Hazardous Ingredients:
Exposure limits are subject to change. Contact ACGIH, OSHA, NIOSH, and IARC for current values.
2. Physical Data:
Solubility in Water:
3. Fire and Explosion Hazard Data:
480°F (Closed cup)
Water fog, CO2, dry chemical, foa