Service Repair Manual
442E BACKHOE LOADER
Product: BACKHOE LOADER
Model: 442E BACKHOE LOADER PCR
Configuration: 442E Backhoe Loader PCR00001-UP (MACHINE) POWERED BY C4.4 (MECH) Engine
Disassembly and Assembly
C4.4 (Mech) Engines for Caterpillar Built Machines
Media Number -KENR9210-10
Publication Date -01/12/2014
Date Updated -08/08/2018
Cylinder Head - Remove
SMCS - 1100-011
a. Remove the exhaust manifold. Refer to Disassembly and Assembly, "Exhaust Manifold -
Remove and Install".
b. Remove the injectors. Refer to Disassembly and Assembly, "Injector - Remove".
c. Remove the rocker shaft assembly and the pushrods. Refer to Disassembly and Assembly
Manual, "Rocker Shaft and Pushrod - Remove".
d. Remove the glow plugs. Refer to Disassembly and Assembly, "Glow Plugs - Remove and
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
442E Backhoe Loader PCR00001-UP (MACHINE) POWERED BY C4.4 (MECH) En...
before opening any compartment or disassembling any component
Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all hoses, on all hose assemblies, on wires and on all tube
assemblies for installation purposes. Plug all hose assemblies and tube assemblies. This helps to
prevent fluid loss and this helps to keep contaminants from entering the system.
1. If the alternator bracket is mounted on the cylinder head, remove the alternator. Refer to
Disassembly and Assembly, " Alternator - Remove".
2. If the fuel priming pump and the fuel filter base are mounted on the cylinder head, remove