FOREWORD
This repair manual has been prepared to provide essential in-
formation on body panel repair methods (including cutting and
welding operations, but excluding painting) for the TOYOTA
CAMRY SOLARA (Convertible).
Applicable models: MCV31L - GKANKA
MCV31L - GKAGKA
This manual consists of body repair methods, exploded dia-
grams and illustrations of the body components and other in-
formation relating to body panel replacement such as handling
precautions, etc. However, it should be noted that the front fend-
ers of the TOYOTA model is bolted on and require no welding.
When repairing, don’t cut and join areas that are not shown in
this manual. Only work on the specified contents to maintain
body strength.
Body construction will sometimes differ depending on specifica-
tions and country of destination. Therefore, please keep in mind
that the information contained herein is based on vehicles for
general destinations.
For the repair procedures and specifications other than collision-
damaged body components of the TOYOTA CAMRY SOLARA
refer to the repair manuals.
If you require the above manuals, please contact your TOYOTA
Dealer.
All information contained in this manual is the most up-to-date at
the time of publication. However, specifications and procedures
are subject to change without prior notice.
INTRODUCTION
IN-5
HOW TO USE THIS MANUAL
1. BODY PANEL REPLACEMENT THIS MANUAL
INTRODUCTION
F13891A
IN-6
F13893A
SYMBOLS
MEANING
ILLUSTRATION
CUT AND JOIN LOCATION
(SAW CUT)
CUT AND JOIN LOCATION
(Cut Location for
Supply Parts)
CUT LOCATION
CUT WITH DISC
SANDER, ETC.
BRAZE
(Removal)
BRAZE
(Installation)
SPOT WELD OR
MIG PLUG WELD
(See Page IN-9)
BODY SEALER
WELD POINTS
CONTINUOUS
MIG WELD
(BUTT WELD)
CONTINUOUS
MIG WELD
(TACK WELD)
—
—
INTRODUCTION
IN-7
2. SYMBOLS
The following symbols are used in the welding diagrams in section BP of this manual to indicate cutting areas
and the types of weld required.
INTRODUCTION
F13894A
SYMBOLS
MEANING
ILLUSTRATION
Assembly Mark
BODY SEALER
(Flat Finishing)
BODY SEALER
(No fla