Foundation Express for Field Engineers (FOUNDFE)
When using the Site to Site VPN wizard in Cisco Router and Security Device Manager,
why would you need to create an access list using the Add a Rule screen?
A. to open holes on the firewall to permit ISAKMP, ESP, and AH traffic
B. to define the traffic that will be protected by IPSec
C. to specify a range of IP addresses on the inside interface
D. to specify the remote-peer IP address range
E. to enable split tunneling
Under normal operation, which light sequence on the Cisco Aironet 1300 Wireless Bridge
indicates that a device is associated to the bridge?
A. The center LED (Status) is solid green.
B. The center LED (Status) flashes green once every second.
C. The center LED (Status) flashes green once every 3 seconds.
D. The center LED (Status) blinks amber when an association occurs.
Refer to the exhibit. According to the error log, VLAN 1 is where the BPDU was received,
and VLAN 2 is where the BPDU originated. When inconsistency is detected, what
A. VLAN 1 is blocked, while VLAN 2 is forwarding.
B. VLAN 1 is blocked, while VLAN 2 is listening.
C. Both VLANs are listening on the port from which this BPDU is sent.
D. Both VLANs are blocked on the port from which this BPDU is received.
A user is not able to access the Cisco Router and Security Device Manager (SDM) via
HTTPS. Which two situations could be causing the problem? (Choose two.)
A. The ip https server command is not in the running-config.
B. The ip http secure-server command is not in the running-config.
C. The user is trying to launch Cisco SDM from the inside (secured) interface with
D. The user does not have a privilege level of 15.
Answer: B, D
The customer wants to implement wireless security through implementation of WPAv2.