PROVEN PERFORMANCE
E235SR
Workshop manual
Workshop
manual
Printed No. 604.13.436
English - Printed in Italy
E235SR
INTRODUCTION
0-1
E235SR
Print No. 604.13.436
WORKSHOP MANUAL
ENGLISH
Edition: 03/2005
English - Printed in Italy
Printed by Studio ti - 20205
INTRODUCTION
0-4
COPYRIGHT BY NEW HOLLAND KOBELCO CONSTRUCTION
MACHINERY S.p.A.
Product Support - Documentation Centre
Strada di Settimo, 323 - 10099 - S. Mauro T.SE (TO) ITALY
All rights reserved. Reproduction of text and illustrations in whole or in part, is
strictly prohibited.
AVOID ACCIDENTS
Most accidents, whether they occur in industry, on the farm, at home or on
the highway, are caused by the failure of some individuals to follow simple and
fundamental safety rules or precautions. For this reason MOST ACCIDENTS
CAN BE PREVENTED by recognising the real cause and doing something
about it before the accident occurs.
Regardless of the care used in the design and construction of any type of
equipment there are conditions that cannot be completely safeguarded
against without interfering with reasonable accessibility and efficient operation.
Carefully read indications, cautions and safety warning quoted in the
“SAFETY RULES” section.
A careful operator is the best insurance against an accident.
The complete observance of one simple rule would prevent many thousand
serious injuries each year.
That rule is:
Never attempt to clean, oil or adjust a machine while it is in motion.
□ATTENTION
On machines having hydraulically, mechanically and/or cable controlled
equipment (such as showels, loaders, dozers, scrapers etc.) be certain
the equipment is lowered to the ground before servicing, adjusting and/
or repairing.
If it is necessary to have the equipment partially or fully raised to gain
access to certain items, be sure the equipment is suitably supported by
means other than the hydraulic lift cylinders, cable and/or mechanical
device used for controlling the equipment.
INDEX
0-5
INDEX
SPECIFICATIONS
Section 1 - Outline
Section 2 - Specification
Sect