To follow our simple instructions to complete the Brother DCP-T700W Setup and Troubleshooting process. Also, get the free driver download & installation guidance Read more https://printer-setup.us/brother-support/brother-dcp-t700w-setup
Brother DCP-T700W Setup Guidance
Unpack the Brother DCP-T700W printer carton
Remove the protective cover of the Brother DCP-T700W printer carton.
Prefer a clean surface and place the Brother machine on it.
Plug the power cable to the power port of the printer & power supply.
Turn on your printer and set your preferences on the control panel.
Set the ink tanks
Pull the access door of the ink tanks of your printer.
Raise the cap of the tanks for filling them.
Unpack the ink bottle provide in the printer box.
Remove the bottle’s cap and film.
Re-fix the cap.
Now remove the tip cover of the ink bottle.
Tilt the bottle and pour ink into the ink tank of the Brother DCP-T700W
Note: Fill the tank by squeezing the bottle.
After filling the tank, push down the cap and close it.
Fill the remaining tanks in the same way as explained in the previous
Load the Brother DCP-T700W printer’s paper tray
Extend the paper tray of the Brother DCP-T700W printer and take it out.
Open the cover of the output tray.
Take a stack of white sheets and fan them.
Place the sheets in the tray and them by adjusting the paper width guides.
Check the print quality of the Brother DCP-T700W printer.