Colt Trooper mk. III
Type: Double Action
Chamber: .38 Special and .357 Magnum
Weight unloaded: varies with different models and barrel lengths
Length: varies with different barrel lengths
Barrel length: 2.5, 4 or 6 inches (64, 102 or 152 mm)
Capacity: 6 rounds
The Colt mk. III family of revolvers appeared in the late 1960s as the first major development in the
Colts' swing-out cylinder revolver design since early 1900s. The mk. III family consisted of the
following major members:
Official Police mk. III revolver - improved version of the famous Colt Official Police, rugged
service firearm chambered for .38 Special only, with fixed sights.
Lawman mk. III revolver - heavy barrelled service revolver chambered for powerful .357 Magnum
ammunition, with fixed sights
Trooper mk. III revolver - service and target revolver, top-of-the line in the mk. III family.
Chambered for .357 Magnum ammunition, with heavy, ribbed barrel and ejector rod shroud,
removable front blade and adjustable rear sights.
The key features of all mk. III revolvers are:
the stainless steel firing pin is mounted inside the frame and is spring-loaded; it could be
activated by the hammer only via the transfer bar, which is raised into the position only
when trigger is pressed; otherwise, hammer falls onto the frame and does not touch the
cylinder rotates clockwise (when looking from behind the gun); this helps to hold proper
chamber-to-barrel position, as cylinder rotation hand pressed it against the frame;
all springs are made from stainless steel
• main spring is of coil type, instead of the old, flat V-shaped spring
all working surfaces are heat-treated to increase service life
the cylinder rotation mechanism is redesigned, so cylinder can be opened or closed only if
the hammer is lowered; if hammer is cocked, the cylinder rotation hand protrudes from iside
the frame and blocks cylinder open or close operations.