327.00
Section 1 — Chemical Product and Company Identification
Section 2 — Composition, Information on Ingredients
Ethylenediamine
Ethylenediamine
Section 3 — Hazards Identification
Call a physician, seek medical attention for further treatment, observation and support after first aid.
Inhalation: Remove to fresh air at once. If breathing has stopped give artificial respiration immediately.
Eye: Immediately flush with fresh water for 15 minutes.
External: Wash continuously with fresh water for 15 minutes.
Internal: Give large quantities of water. Call a physician or poison control at once.
Section 4 — First Aid Measures
Section 7 — Handling and Storage
Avoid contact with eyes, skin and clothing. Wear chemical splash goggles, chemical-resistant gloves and chemical-resistant apron.
Use ventilation to keep airborne concentrations below exposure limits. Always wear a NIOSH-approved respirator with proper
cartridges or a positive pressure, air-supplied respirator when handling this material in emergency situations (spill or fire).
Exposure guidelines: TWA 10 ppm, (OSHA).
Clear, colorless liquid; ammonia odor; strong base.
Moderately toxic by ingestion, inhalation and skin absorption; severe irritant to skin and eyes.
Substance is caustic and corrosive. Avoid all body tissue contact.
Flammable liquid.
Section 5 — Fire Fighting Measures
Class 1C Flammable liquid.
Flash Point: 93 F Upper: 16% Lower: 2.7% Autoignition Temperature: 715%
When heated to decomposition, emits toxic fumes of NH3 and NOx.
Fire Fighting Instructions: Use triclass, dry chemical fire extinguisher. Firefighters should wear PPE
and SCBA with full facepiece operated in positive pressure mode.
Section 6 — Accidental Release Measures
Restrict unprotected personnel from area. Remove all ignition sources and ventilate area. Contain spill with sand and absorbent
material; deposit in sealed bag or container. See Sections 8 and 13 for further information.
Section 8 — Exposure Controls , Personal Protection
Flinn Suggested Chemical Storage Patte