Rev. 3 - 02/09
ARCHITECTS' AND ENGINEERS'
The key keeper(s) shall be Alpha Communications®/
Florence K26 series, or approved equal. Key Keeper
faceplate shall be constructed of heavy duty stainless
steel. The key keeper shall be ('loose key' model K26, '
retractor reel' model K26R or 'push-button' type model
K26P). The Key Keeper(s) shall be flush mounted into the
finished wall surface. The Key Keeper door hinge shall be
fully hinged to minimize vandalism and unauthorized
opening. Contractor shall install the key Keeper as per all
U.S. Postal Service regulations. Key Keeper(s) shall in-
clude postal lock mounting bracket and screws required.
Key Keeper shall be mounted (horizontally or vertically).
Contractor shall install as per USPS regulations, and local
and national building codes.
Copyright© 1995-2009, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: email@example.com
K26 Loose Key Type
K26 Series Stainless Steel
Flush Mount Key Keepers
The Alpha Communications® K26 series flush mount key
keepers are designed specifically to mount in conjunction with
stainless steel lobby panels, directories or mail boxes, or where
a heavy-duty vandal-resistant key keeper is required.
The K26 series key keepers are U.S. Postal Service Approved,
and are required when mailboxes are installed behind a locked
entry door. This allows the Postman access to the mail boxes,
without having to bother (or wait for) any of the building's
These key keepers can be mounted vertically or horizontally and
include the mounting hardware for the installation of the postal
lock (supplied by the local post office).
The K26 series key keepers are designed to be flush mounted
only. U.S. Postal Service regulations do not allow for a key keeper
to be surface mounted. The K26 series key keepers are availa