There is a need for temperature drop in a buried pipeline based on the media and process. Need of some methodology and design requirement for a set of conditions by reducing pipeline surface temperature and the temperature drops to atmospheric temperature at a particular distance of pipeline. Based on the conduction principle, desire reduction up to atmospheric temperature can be possible. Let us understand by below methods and design of Heat sink for buried pipe line. Natvarbhai Prabhudas Gajjar "Heat Sink for Underground Pipe Line" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45117.pdf Paper URL: https://www.ijtsrd.com/engineering/other/45117/heat-sink-for-underground-pipe-line/natvarbhai-prabhudas-gajjar
International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 5 Issue 5, July-August 2021 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
@ IJTSRD | Unique Paper ID – IJTSRD45117 | Volume – 5 | Issue – 5 | Jul-Aug 2021
Page 1407
Heat Sink for Underground Pipe Line
Natvarbhai Prabhudas Gajjar
Retired Teacher, Ahmedabad, Gujarat, India
ABSTRACT
There is a need for temperature drop in a buried pipeline based on the
media and process. Need of some methodology and design
requirement for a set of conditions by reducing pipeline surface
temperature and the temperature drops to atmospheric temperature at
a particular distance of pipeline. Based on the conduction principle,
desire reduction up to atmospheric temperature can be possible. Let
us understand by below methods and design of Heat sink for buried
pipe line.
How to cite this paper: Natvarbhai
Prabhudas Gajjar "Heat Sink for
Underground Pipe
Line" Published in
International Journal
of Trend in Scientific
Research
and
Development (ijtsrd),
ISSN:
2456-6470,
Volume-5 | Issue-5,
August 2021, pp.1407-1410, URL:
www.ijtsrd.com/papers/ijtsrd45117.pdf
Copyright © 2021 by author (s) and
International Journal of Trend in
Scientific Research and Development
Journal. This is an
Open Access article
distributed under the
terms of
the Creative Commons
Attribution License (CC BY 4.0)
(http://creativecommons.org/licenses/by/4.0)
Basic principles of heat transfer:
Conduction:
Q=k*A*(T1 - T2) / L
where k is the thermal conductivity of the material, A
is the cross sectional area, T1 is the initial (pre-diffuse
or inner surface) temperature, and T2 is the
temperature at the final cross-sectional area (or outer
surface). You can look of the k value for your
material very easily.
Convection:
Q=h*A*(T.s - T.f)
where h is the convective heat transfer coefficient, A
is the surface area, T.s is the surface temperature of
the object cooling, and T.f is the