Follow brief instructions to unbox & setup 123.hp.com/dj3700 printer. Download latest HP Deskjet 3700 driver. For queries, reach our toll-free to solve instantly. Read more https://printerdriver.us/123.hp.com/dj3700
HP DESKJET 3700 SETUP
Verify the supplies inside the box: First, ensure that the manufacturer’s seal is present on
top of the 123.hp.com/dj3700carton.
After opening the package, take the installation disk, ink cartridges, warranty card, and
other accessories out of it.
Check whether all the components are available.
Remove the 123.hp.com/setup 3700 printer from the box: Once you lift the HP Deskjet
3700 printer from the shipment package, make sure that you keep it on a dust-free, stable
Discard the plastic wrap from the Hewlett Packard device. After all the packing materials
and tapes are removed, recycle the same.
Establish the power connection: An electrical cable is delivered along with the model of
your Hewlett Packard device in the package, use it for setting up the power connection.
Locate the power port on your 123.hp.com/dj3700 printer and then connect the electrical
cable to it.
The other end of the electrical cable must be connected to a wall outlet or electrical
Make sure that you do use a surge protector film or strip when the power connection is
The Deskjet 3700 printer powers up after the Power button is force pressed. When the
printer is powered up for the first time, it will produce noises.
Wait until the Hewlett Packard device remains silent.
Install the cartridges: A pack of ink cartridges is shipped with the Deskjet 370 printer in
It is essential to use cartridges that are compatible with the model of your HP printer.
Issues might occur in the printer if you do not install 123.hp.com/setup 3700 printer
compatible ink cartridges.
The carriage located inside the device will move to the center area after the HP Deskjet
3700 Setup printer cartridge access door is opened.
The cartridges must be installed only after the carriage does not make any sound.
Take the new cartridges out of their package. You must use only the black plastic area
that is available on the cartridge.
Make sure to remov