Material Safety Data Sheet
Manufacturer: Xerox Corporation
Telephone # (s): Safety Information: (800) 828-6571
Rochester, NY 14644
Health Emergency: (585) 422-2177
Section I - Product Identification
Trade Names/Synonyms: 5312/5313/5314 Black Dry Ink
Part No.: WH: 6R379, 6R380, 6R563*;
This is not a WHMIS controlled product.
Ingredients (% by wt.)
Styrene/acrylate polymer (45-50%)
Iron oxide (45-50%)
Polypropylene wax (1-4%)
Quaternary ammonium salt (<2%)
Section II - Emergency and First Aid
Primary Route of Entry:
Symptoms of Overexposure:
Minimal respiratory tract irritation may occur as with
exposure to large amounts of any non-toxic dust.
Flush with water.
Medical Conditions Generally Aggravated by Exposure:
Wash with soap and water.
None when used as described by product literature.
Remove from exposure.
Dilute stomach contents with several glasses of water.
Section III - Toxicology and Health Information
This material has been evaluated by Xerox Corporation. The toxicity data noted below is based on test results of similar xerographic
>5 g/kg (rats) practically non-toxic.
10 mg/m3 (total dust)
>2 g/kg (rats) practically non-toxic.
15 mg/m3 (total dust)
>5 mg/l (rats, 4 hr exposure)practically non-toxic.
5 mg/m3 (respirable dust)
>20 mg/l (rats, calculated 1 hr exposure) non-poisonous, DOT.
Skin Sensitization: Not a sensitizer.
XEL1: 2.5 mg/m3 (total dust)
Not an irritant.