Copyright© 2005-2006, Alpha Communications®, All Rights Reserved.
AWD108 Rev. 4 (08/06)
The AlphaStatus™system allows one or more RSS402,
RSS403, RSS404 and/or RSS405 room status stations to
providelockingpush-buttonregistration (ofup to4differ-
ent colors) of the room status to the LI380 or LI382
corridor dome status light(s). When one or more optional
master stations are used, the status registered by each
room status station will also be displayed at each master
station and other indicators based on the systemconfigu-
ration. A number of optional accessories are available to
RSS405also allows for optional audible signalingfroma
room location to the master location(s).
1. Read installation instructions for each unit to deter-
mineequipment locationand installation method.
Install housingsand wiring.
4. Check wiring and connect. Observe all local and
national electrical andbuildingcodes.
5. Apply power and check operation, making sure to
observe polarity where indicated.
HOUSING INSTALLATION AND
INSIDE ROOM STATUS STATIONS
Locate stations where needed at a convenient height,
about 4.5 feet (137cm) from the finished floor. Unit can
be flush mounted over a double gang electrical box or
double gang plaster ring, or surface mounted using a
CORRIDOR DOME STATUS LIGHTS
Locate corridor dome status lights where needed, in the
corridor outside of each room location. Typically, these
dome lights mount right over the doorway to the room.
They can be mounted on the side of the room door, but
please mount themhigh enough to avoid anyone walking
into the dome light portion that protrudes from the wall.
Unit can be flush mounted over a double (or single) gang
electrical box or double (or single) gang plaster ring, or
surfacemountedusinga doublegangmountingbox (with
suitable inside clearance depth).
AlphaStatus™ Room Status System
Installation and Use Instruc