Service Repair Manual
Models
C18 Industrial Engine
Shutdown SIS
Previous Screen
Product: INDUSTRIAL ENGINE
Model: C18 INDUSTRIAL ENGINE GJE
Configuration: C18 Industrial Engine GJE00001-UP
Disassembly and Assembly
C15 and C18 Industrial Engines
Media Number -RENR8630-07
Publication Date -01/11/2017
Date Updated -15/11/2017
i02536739
Fuel Priming Pump - Remove and Install
SMCS - 1258-010
Removal Procedure
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Turn the fuel supply to the “OFF” position.
1/3(W)
w
2020/6/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Illustration 1
g01049296
2. Remove bolts (2). Remove fuel priming pump assembly (1) from fuel filter base (4).
3. Remove gasket (3) from the fuel priming pump assembly and the fuel filter base.
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3(W)
w
2020/6/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Illustration 2
g01049296
1. Position gasket (3) on fuel filter base (4).
2. Position fuel priming pump assembly (1) on the fuel filter base and install bolts (2).
3. Turn the fuel supply to the “ON” position.
4. Remove the air from the system. Refer to Testing and Adjusting, "Fuel System - Prime".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Jun