Typical NC150N Master
Copyright© 1997-2009, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: email@example.com
Rev. 3 - 02/09
Door Station Adaptor
Dimensions: Height: 0.75" (19mm)
Width: 3.50" (89mm)
Depth: 3.25" (83mm)
Projects: 0.50" (13mm)
from panel module.
Push-push-type switch, one
per lamp/switch circuit.
.03 Amp per lamp
Connection: Positive screw terminals
Mounting: Mounts on NC150N and/or
Indicators: Lamp indication
Suitable marking by stamping
or dry transfer method. Use
our model # RP021CM.
(shown with RP021CM lens caps)
The PM151/4 4-lamp Door Station Adaptor is spe-
cifically designed to work with the NC150N master
station(s) and is used to permit communications
with remote speakers located at entrances or at any
location where visual signaling is not required or
Each PM151/4 will permit connection of up to 4
remote stations. Calls from remote stations are indi-
cated by tone and by lamp annunciation. Tone
calling and communication to remotes is permitted
by use of the NC150N TALK and CALL buttons.
• Modular Design
• Protected Markings, Up to 4 digits per lamp
• Easy Installation
• Push-button Operation
• Lamp and Tone Call Annunciation
SYSTEM WIRING LAYOUT
NOTE: Dotted lines indicate wiring required to each remote
station- 3 Conductor #22 twisted pair (shielded when not in
Due to continuous product improvement, all colors, sizes, materials,
finishes and specifications are subject to change without notice.