Complete Guide on Cleaning Heater Vents
Cleaning that vent might be skipped from your mind because it could not be shown on
sight. Cleaning the heater vents is a very simple and quick process. There is no more
effort required in the cleaning heater vents. Some of the equipment that you need
during the process of cleaning are:
1: A vacuum cleaner:
A vacuum cleaner that you are regularly using should be adequate. However, there is a
need for a vacuum cleaner with a long hose and plenty of attachments to reach all the
crannies and nooks. So, to get adequate cleaning, you have to skip your regular vacuum
cleaner and take a vacuum cleaner on rent to clean these heater vents.
2: A screwdriver:
Most of the screws and vents are tightened. So to open it, there is a need for a screwdriver
to open those screws. To get access to your heating system.
3: Scrub brush:
In the cleaning process, when there is a time to remove the dust from the vent, there is a
need for a Scrub brush. There is a need for a long, well handled meeting for that.
4: Broom and cleaning clothes:
At last, to remove all the dust and debris from the vent.
Steps for the cleaning of these heater vents are given below:
Whenever you are doing a cleaning of the vent, the first step is safety. Before starting the
cleaning, turn off the heater. If you want to get help from a professional, you have to
contact the air duct cleaning in Alpharetta.
Now open the screws of the vent and, with the help of a brush, remove all the debris and
dust from the vent. If the ducts of the heater are so dirty, then never hesitate to wash them
with water and soap.
In the third step, you have to grab your long Scrub brush and clean all the walls of the air
ducts completely from inside and from outside. Clean all the sides as far as you go with
your brush. Try to take the long meeting that goes inside completely and reach all the
places that are hard to get. If the mold growth