MATERIAL SAFETY DATA SHEET
The information contained in this form is based on data from sources considered to be reliable but Irving Oil does not guarantee the accuracy or completeness thereof. The information is
provided as a service to the persons purchasing or using the material to which it refers and Irving Oil expressly disclaims all liability for loss or damage including consequential loss or for
injury to persons including death. The information shall not be reproduced, published or distributed in any manner without prior consent in writing of Irving Oil
compres.doc
Page 1 of 2
SECTION 1 - PRODUCT IDENTIFICATION AND USE
Product Name:
Compressor Oil (All)
Synthetic Compressor Oil (All)
Product Class:
Lubricant
WHMIS Classification:
Not Controlled.
Supplier Name and Address:
Irving Oil
Phone:
(506) 632-2000
10 Sydney Street
Emergency:
(506) 648-3060
Saint John, N.B.
E2L 4K1
SECTION 2 - HAZARDOUS INGREDIENTS OF MATERIALS
Hazardous Ingredients
CAS#
wt%
ACGIH-TLV
LC50
LD50
None
SECTION 3 - PHYSICAL DATA AND CHEMICAL PROPERTIES
Form:
Liquid
Vapour Pressure (mm @ 20oC):
< 0.10
Colour:
Yellow
Volatile (wt%):
0
Odour:
Petroleum
Specific Gravity @ 15oC: 0.86 –0.88
Solubility:
Negligible
SECTION 4 - FIRE AND EXPLOSION HAZARD
Flammability: ⌧Yes
No
Conditions:
Open flame above flash point.
Flash Point : >195oC (COC)
Upper Flammable Limit:
Not established.
Lower Flammable Limit:
Not established.
Auto Ignition Temperature:
> 300oC
TDG Flammability Classification:
Not classified.
Sensitivity to Impact:
None.
Sensitivity to Static Discharge:
None.
Means of Extinction:
Dry chemical, water spray (fog), foam or carbon dioxide.
Hazardous Combustion Products:
Hydrogen sulphide and oxides of carbon, nitrogen, sulphur and phosphorus.
Special Procedures:
Water foam may cause frothing. Use water to c