Service Repair Manual
Models
325 325L EXCAVATOR
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325 L EXCAVATOR 2JK
Configuration: 325, 325L EXCAVATOR 2JK00001-UP (MACHINE)
Disassembly and Assembly
325, 325B and 325L Excavators
Media Number -RENR1178-03
Publication Date -01/09/2000
Date Updated -09/10/2001
i01767061
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure For The Final Drive On CIPI
Undercarriage Arrangements Which Are Based On 325 and
325B Track Type Excavators
Table 1
Required Tools
Tool
Part Number
Part Description
Qty
A
1P-2420
Transmission Repair Stand
1
B
138-7573
Link Bracket
2
C
1P-1860
Retaining Ring Pliers
1
D
6B-6682
Full Nut
1
1P-5546
Crossblock
1
5P-8248
Hard Washer
4
6V-3142
Plate
1
(1) Threaded Rod
1
(2) Spacer
4
E
138-7574
Link Bracket
2
F
8B-7561
Step Plate
1
5F-7465
Puller Gp
1
1H-3107
Push-Puller Tool Gp
1
1/24
325, 325L EXCAVATOR 2JK00001-UP (MACHINE)(SEBP2008 - 03) - Documentat...
2020/7/29
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
1H-3112
Bearing Cup Puller Gp
1
1P-5551
Adjustable Screw Assembly
1
( 1 ) The 16 NF threaded rod is 280 mm (11 inch) long × 19 mm (0.75 inch) in diameter.
( 2 ) The spacer's outer diameter is 64 mm (2.5 inch). The spacer's inner diameter is 25.4 mm (1.0 inch). The spacer's
thickness is 6.4 mm (.25 inch).
Start By:
A. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove" in this
manual.
1. Thoroughly clean the outside of the final drive prior to disassembly.
2. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the part's original locations.
Illustration 1
g00511587
3. Fasten the final drive to Tool (A), as shown. The combined weight of the final drive and
final drive sprocket is approximately 361 kg (795 lb).
4. R