MOORCRAFT
Super Spec® Low Lustre
Latex House Paint 185
Benjamin Moore & Co., 51 Chestnut Ridge Road, Montvale, NJ 07645 Tel: (201) 573-9600 Fax: (201) 573-9046 www.benjaminmoore.com
M72 18500 8/01
Features
General Description
An exterior acrylic blended low lustre latex house paint.
▲ Popular Low Lustre
finish.
▲ Provides mildew
resistant coating.
▲ Excellent hiding.
▲ Exceptional film
durability.
▲ Resistant to color fading.
▲ Resistant to blistering.
▲ Alkali resistant.
▲ Fast dry for quick
recoating.
▲ Easy to apply.
▲ Soap and water clean
up.
Recommended For:
Limitations:
• Do not apply when air and surface temperatures are
below 50° F (10° C).
Colors: —Standard:
185 01 White.
(White and colors may be tinted with up to 2.0 fl. oz.
of Benjamin Moore & Co. colorants per gallon.)
—Tint Bases:
Benjamin Moore & Co. bases 1B, 2B, 3B, & 4B
—Special Colors:
Contact your Benjamin Moore & Co. representative
Certification:
Formulated without lead, mercury, or chromates.
Federal Specifications Generic Equivalent
TT-P-96-D
Technical Assistance
Available through your local authorized independent
Benjamin Moore & Co. dealer.
For the location of the dealer nearest you, call 1-800-826-2623,
see www.benjaminmoore.com, or consult your local Yellow pages.
◆ Values given are for color shown; other colors may vary.
For wood siding, trim, shakes and shingles; hardboard,
aluminum, and vinyl siding; stucco, cinder block, unglazed
brick and primed metal.
Technical Data
White
Vehicle Type
Acrylic Blended Latex
Pigment Type◆
Titanium Dioxide
Volume Solids◆
28%
Theoretical Coverage At
Recommended Film Thickness
350-475 Sq. Ft.
Be sure to estimate the right amount of paint for the job. This will
ensure proper coverage and minimize the disposal of excess paint.
Recommended Film Thickness – Wet
3.6 Mils
– Dry
1.0 Mils
Dry Time @ 77° F — Set To Touch
1 Hour
(25° C) @ 50% RH — Dry To Touch
1 Hour
— To Recoat
4 Hours
— To Hard Dry
Overnight
Dries By
Evaporation, Coalescence
Viscosity◆
100 ± 3 KU
Flash Point (Seta)
None
60˚