Instructor Notes:
CATIA V5 Fundamentals - Lesson 7: Finalizing Design Intent
Copyright DASSAULT SYSTEMES
7-1
Copyright DASSAULT SYSTEMES
Lesson 7: Finalizing Design Intent
In this lesson, you will learn how to analyze a model and create formulas.
Case Study: Finalizing Design Intent
Design Intent
Stages in the Process
Applying Material Properties
Analyzing the Model
Formulas
Duration: Approximately 0.5 day
Lesson content:
Lesson Content
Student guide: Lesson 7: Finalizing Design Intent
Introduce the lesson. Present the lesson objectives and topics.
The document is for study only,if any tort to your rights,Please inform us,we will delete it
www.cadfamily.com
Contact:cadserv21@hotmail.com
Instructor Notes:
CATIA V5 Fundamentals - Lesson 7: Finalizing Design Intent
Copyright DASSAULT SYSTEMES
7-2
Copyright DASSAULT SYSTEMES
Case Study: Finalizing Design Intent
The case study for this lesson is the table used in the Drill Support assembly and shown
below. The table is part of the Stand sub-assembly. This case study focuses on applying
material to the model, analyzing its mass properties, verifying dimensions, and creating
formulas to ensure design intent is maintained when modifications are applied.
Case Study: Finalizing Design Intent
Student Guide: Lesson 7- Case Study: Finalizing Design Intent
Introduce the case study for this lesson.
The table is part of the stand sub-assembly.
Locate where the table is in the sub-assembly and where the sub-assembly is in the
main assembly.
Consider opening the Drill Press assembly in CATIA and showing the table location
directly on the assembly.
The document is for study only,if any tort to your rights,Please inform us,we will delete it
www.cadfamily.com
Contact:cadserv21@hotmail.com
Instructor Notes:
CATIA V5 Fundamentals - Lesson 7: Finalizing Design Intent
Copyright DASSAULT SYSTEMES
7-3
Copyright DASSAULT SYSTEMES
Design Intent
a
L
b
L
c
d
Model must be made of aluminum.
Model geometry must adhere to the
followi