LOADALL (ROUGH TERRAIN
VARIABLE REACH TRUCK)
531-70, 535-95, 541-70
EN - 9813/9050 - ISSUE 1 - 01/2018
This manual contains original instructions, verified by
the manufacturer (or their authorized representative).
Copyright 2017 © JCB SERVICE
All rights reserved. No part of this publication may
be reproduced, stored in a retrieval system, or
transmitted in any form or by any other means,
electronic, mechanical, photocopying or otherwise,
without prior permission from JCB SERVICE.
The Operator's Manual
You and others can be killed or seriously injured
if you operate or maintain the machine without
first studying the Operator's Manual. You must
understand and follow the instructions in the
Operator's Manual. If you do not understand
anything, ask your employer or JCB dealer to
Do not operate the machine without an Operator's
Manual, or if there is anything on the machine you
do not understand.
Treat the Operator's Manual as part of the machine.
Keep it clean and in good condition. Replace the
Operator's Manual immediately if it is lost, damaged
or becomes unreadable.
01 - Machine
03 - Attachments, Couplings and Load
06 - Body and Framework
09 - Operator Station
- Heating, Ventilating and Air-
15 - Engine
18 - Fuel and Exhaust System
21 - Cooling System
24 - Brake System
25 - Steering System
27 - Driveline
30 - Hydraulic System
33 - Electrical System
72 - Fasteners and Fixings
75 - Consumable Products
78 - After Sales
15 - Engine
00 - Engine
00 - General
15 - 27
15 - 27
Drain and Fill
Refer to: PIL 15-21-00.
Notice: Clean the engine before you start engine
maintenance. Obey the correct procedures.
Contamination of the fuel system will cause
damage and possible failure of the engine.
Notice: The engine and other components could
be damaged by high pressure washing systems.
Special precautions must be taken if the machine
is to be washed using a high pressure system.
Make sure that the alternator, starter