Service Repair Manual
Models
D35C ARTICULATED
DUMP TRUCK
Shutdown SIS
Previous Screen
Product: ARTICULATED TRUCK
Model: D35C ARTICULATED TRUCK 2GD
Configuration: D35C ARTICULATED DUMP TRUCK 2GD00001-00124 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09
Publication Date -01/01/2013
Date Updated -25/01/2013
i01139602
Fuel Injection Pump Housing - Disassemble
SMCS - 1253-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
1P-1860
Retaining Ring Pliers
1
Start By:
A. Disassemble the governor. Refer to Disassembly and Assembly, "Governor - Disassemble".
B. Remove the fuel injection pumps. Refer to Disassembly and Assembly, "Fuel Injection
Pump - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5
D35C ARTICULATED DUMP TRUCK 2GD00001-00124 (MACHINE) POWERED ...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g00456860
1. Remove cover (1) and the gasket.
Illustration 2
g00456923
2. Remove fuel rack (2) from the fuel injection pump housing.
Illustration 3
g00456924
2/5
D35C ARTICULATED DUMP TRUCK 2GD00001-00124 (MACHINE) POWERED ...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Note: If the original lifters are being reused in the fuel injection pump housing, place
identification marks on the lifters in order to identify the locations.
3. Remove lifters (3) from the fuel injection pump housing.
Illustration 4
g00456925
4. Position the fuel injection pump housing on wood blocks, as shown. Use Tool (A) in order
to remove snap ring (4) .
Illustration 5
g00456926
5. Use a soft hammer to push the camshaft toward the governor end of the fuel injection pump
housing in order to loosen washer (5). Remove washer (5) .
3/5
D35C ARTICULATED DUMP TRUCK 2GD00001-00124 (MACHINE) POWERED ...
202