How To Configure Brother MFC 490CW Setup?
Brother MFC 490CW setup - It is a color inkjet printer that is best suitable for everyday
use. You can connect this printer to your desktop or laptop over a USB cable, wired, or
Components Inside The Box
Brother MFC 490CW printer
Starter Ink cartridges
Quick setup guide
Telephone Line Cord
Steps To Set Up Brother MFC 490CW
Open the product box and take all the components out of the box.
Make sure that the above-mentioned components are present inside the box. If
any of the component is missing, then contact your Brother printer dealer or
Clear all the packing materials from your Brother printer and place it on a table or
on a surface that is stable and clean.
Take the paper tray completely out of the printer.
Open the tray and align the width guides.
Place a stack of plain paper in the tray.
Adjust the guides correctly.
Close the tray and place it back into the printer.
Now, connect the power cord to the printer.
If you wish to use the printer for the Fax operation, then connect the telephone
line cord to it.
Make sure not to connect the USB cable or an Ethernet cable to your printer now.
Connect it only during the driver installation.
Now, turn on your Brother printer.
The message saying No Cartridge will be displayed on the screen.
Open the cartridge cover. Remove the protective part from the cartridge slot.