How To Configure Brother MFC 5890CN Setup?
Brother MFC 5890CN setup - Brother MFC 5890CN is a multi-function printer, and so
it performs printing, scanning, copying, and faxing functions. It makes use of the Color
Inkjet technology. The printer weighs around 10.7 kg and is supported on both the
Windows and Mac operating systems. This printer can be conveniently used both at
home and in the office.
You have to perform both the hardware and software Brother MFC 5890CN printer
setup. First, let us look into the hardware setup part:
The first step will be to unbox the printer and check whether all the components are
present inside the box. To do the same, follow these steps
Carefully take the Brother printer out of its box.
Place it in the location you have chosen.
Take out the protective tape and the film covering the scanner glass of the
Ensure that the following components have been delivered along with your
Quick Setup and User’s Guide
Accessory Order Form
Test Sheet (only for USA)
Telephone Line Cord and One Touch Labels
Loading Paper Into The Printer
The first thing to do Brother MFC 5890CN setup is loading the paper into your
printer. NOTE: Remember that you have to use only plain Letter/A4 paper for
loading into your printer.
Pull out the paper tray from your printer.
Next, open your paper tray cover.
Use both your hands to press and slide the paper side guides. Then, slide the
paper length guide. Make sure that the guides fit the size of the paper you are
Fan the stack of paper to prevent paper jams.
Load the paper into the Brother printer’s paper tray with the print side facing
Adjust your paper side guides to the paper using both your hands.
Close the paper tray cover and then push the paper tray into your printer.
Connecting Power Cable & Telephone Line
CAUTION: In case you are using a USB cable, avoid connecting it now.
Get hold of the power cable and connect one of its ends