Service Repair Manual
Model
432D BACKHOE LOADER
Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER TDR
Configuration: 432D Backhoe Loader TDR00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Number -SENR5069-18
Publication Date -01/05/2015
Date Updated -19/09/2018
i02296699
Rocker Shaft and Pushrod - Remove
SMCS - 1102-011; 1208-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
6K-0806
Cable Strap
3
Start By:
a. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2
432D Backhoe Loader TDR00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g00960222
Illustration 2
g00960224
1. If the rocker shaft will not be disassembled, install the Tooling (A) around the rocker arms
(4) in order to slightly compress the springs (5). The rocker arms must be held away from
the machined faces of the cylinder head (2) during installation.
2. Remove the Torx screws (1) from the rocker shaft (3).
3. Remove the rocker shaft assembly from the cylinder head.
4. Remove the pushrods (6) from the cylinder head. Place an identification mark on each of the
pushrods for installation.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Sep 19 19:41:02 UTC+0800 2019
2/2
432D Backhoe Loader TDR00001-UP (MACHINE) POWERED BY 3054C Engine(S...
2019/9/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 432D BACKHOE LOADER TDR
Configuration: 432D Backhoe Loader TDR00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
3054C Engines for Caterpillar Built Machines
Media Nu