Service Repair Manual
745C Articulated Truck
Product: ARTICULATED TRUCK
Model: 745C ARTICULATED TRUCK TFK
Configuration: 745C Articulated Truck TFK00001-UP (MACHINE) POWERED BY C18 Engine
Disassembly and Assembly
735C, 740C EJECTOR and 745C Articulated Trucks Power Train
Media Number -UENR4227-04
Publication Date -01/09/2015
Date Updated -02/07/2018
Output Transfer Gears - Disassemble
SMCS - 3159-015-OJ
Tool Part Number
Push-Puller Tool Gp
Bearing Puller Gp
Lifting Eye Assembly
(1) Cut off the threaded ends of Bolts (D).
a. Remove the output transfer gears.
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
745C Articulated Truck TFK00001-UP (MACHINE) POWERED BY C18 Engine(SE...
before opening any compartment or disassembling any component
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Dispose of all fluids according to local regulations and mandates.
Personal injury or death can result from improper lifting or blocking.
When a hoist or jack is used to lift any part or component, stand clear of
the area. Be sure the hoist or jack has the correct capacity to lift a
component. Install blocks or stands before performance of any work
under a heavy component.
Approximate weights of the components are shown. Clean all surfaces
where parts are to be installed.
Note: Exercise caution when you handle the case and the covers for the output transfer gears.