ARCHITECTS' AND ENGINEERS'
The Auxiliary Relay(s) shall be Alpha Communica-
tions®/Golmar model SAR-12/24, or approved equal.
The SAR-12/24 shall be built into a rugged high
impact ABS plastic case, and shall be powered by
the 18VDC provided when an apartment handset or
monitor is called from an entry station. Contractor
shall furnish the proper number of SAR-12/24 units,
depending upon system requirements.
Low voltage wiring shall be used and positive screw
terminal connectors shall be provided for installation
wiring. The SAR-12/24 shall be mountable right to
the surface of the wall, or behind the wall in the
Contractor shall observe all local and national elec-
trical and building codes.
Copyright© 2010, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: email@example.com
The Alpha Communications®/Golmar SAR-12/24
Auxiliary Relay is used only with the Platea and/or
Szena series intercom and/or video-intercom sys-
tems. The SAR-12/24 is activated when the Platea
and/or Szena station is called from a door entry
station, and provides a dry contact relay closure to
activate an auxiliary signaling device.
All SAR-12/24 field connections are positive screw
terminal type, and the SAR-12/24 is powered
directly from the 18VDC provided at the apartment
station, when called from an entry station.
Each Platea and/or Szena series station that re-
quires remote signaling requires a minimum of one
SAR-12/24 Auxiliary Relay.
• Easily Installs Right on Finished Wall Surface or
behind the apartment station.
• Operates on Safe Low-Voltage Class II Wiring
• Positive Screw Terminal Connectors
Height: 3.55" (91mm)
Width: 2.84" (73mm)
1.75" (45mm) from mounting
Construction: High impact ABS plastic case
Positive screw terminal connectors