Service Repair Manual
Models
M315C WHEELED Excavator
Shutdown SIS
Previous Screen
Product: WHEELED EXCAVATOR
Model: M315C WHEELED EXCAVATOR BDM
Configuration: M315C EXCAVATOR BDM00001-02000 (MACHINE) POWERED BY 3054 Engine
Disassembly and Assembly
M315C Excavator Power Train
Media Number -RENR6964-04
Publication Date -01/08/2018
Date Updated -17/08/2018
i01933170
Final Drive Carriers, Hubs and Brakes - Disassemble - Front
Axle
SMCS - 4054-015; 4092-015; 4253-015; 4255-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number
Part Description
Qty
A
1P-1863
Retaining Ring Pliers
1
B
1U-5839
Bearing Puller Gp
1
1P-0459
Drive Plate
1
C
6V-6080
Torque Multiplier Gp
1
123-6703
Centering Guide
1
123-6704
Centering Guide
1
D
1P-0510
Driver Gp
1
1V-6415
Boss
1
8T-0985
Bearing
1
E
1P-1861
Retaining Ring Pliers
1
F
5P-4758
Retaining Ring Pliers As
1
ZZ
6V-9508
Face Seal Plug
1
6V-9829
Cap As
1
1/10(W)
w
2020/4/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
Start By:
a. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
b. Remove the tire and the rim. Refer to Disassembly and Assembly, "Tire and Rim -
Remove".
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN
PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS
SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the attachments have been lowered, oil is cool before
removing any components or lines. Remove the oil filler cap only when
the engine is stopped, and the filler cap is cool enough to touch with
your bare hand.
NOTICE
Care must be taken to ensure that fluids are contained during