Service Repair Manual
Models
936E WHEEL LOADER
Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 936 WHEEL LOADER 33Z
Configuration: 936E WHEEL LOADER 33Z03091-UP (MACHINE) POWERED BY 3304 ENGINE
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09
Publication Date -01/01/2013
Date Updated -25/01/2013
i00985281
Flywheel Housing - Remove and Install
SMCS - 1157-010
Removal Procedure
Table 1
Required Tools
Tool
Part Number
Part Description
Qty
A
138-7573
Link Bracket
2
Start By:
A. Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
B. Remove the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear
Seal - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Remove the bolts that hold the oil pan plate to the flywheel housing. Loosen the remaining
bolts that hold the oil pan plate in position. Put spacers between the cylinder block and the
oil pan plate. This must be done in order to prevent damage to the gasket for the oil pan
plate.
Note: If the gasket for the oil pan plate is damaged, the oil pan plate must be removed.
Refer to Disassembly and Assembly, "Engine Oil Pan Plate - Remove and Install".
1/3
936E WHEEL LOADER 33Z03091-UP (MACHINE) POWERED BY 3304 ENGINE...
2020/3/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g00516402
2. Remove turbocharger oil drain line (1) .
3. Install Tool (A) on the flywheel housing. Fasten a hoist to Tool (A) on the flywheel
housing.
4. Remove all bolts (2) and the flywheel housing from the engine. The weight of the flywheel
housing is 37 kg (82 lb).
Installation Procedure
Table 2
Required Tools
Tool
Part Number
Part Description
Qty
A
138-7573
Link Bracket
2
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Put the gasket in position and use a hoist to