INSTACRETE is a hand kneadable, fast curing epoxy putty that mixes in
one minute to provide permanent repairs to concrete. INSTACRETE can
be drilled, sawed, sanded, filed, tapped, machined or painted.
INSTACRETE is specially formulated to have the same appearance and
texture of concrete when cured. It comes in a “tootsie-roll” form with
the curing agent encapsulated in the contrasting color base material.
Its putty consistency eliminates drips and runs providing “no mess”
applications with no tools required for use.
FEATURES AND TYPICAL USES:
After proper mixing, INSTACRETE can be used for 1,001 industrial
purposes including repair and replacement of ceramic tiles, patching
chipped concrete, floors, brick, blocks; sealing tie rod holes;
anchoring, and many more applications.
S U R FACE PREPA R ATION AND APPLICAT I O N
Surface Preparation: In order to achieve optimum adhesion, surfaces
should be solid, clean and free of grease and dirt. Scuffing or sanding
the surface prior to cleaning helps ensure a good bond. Degreasers
such as mineral spirits or isopropyl alcohol are effective. See
manufacturer’s MSDS for safety precautions when using solvents or
degreaser.
Mixing: Twist or cut off required amount. Replace the foil disc on the
exposed end of the unused stick after cutting to decrease skinning of
the interior curing agent. To mix the cut off portion, knead with fingers to a uniform color. If mixing is difficult,
warm INSTACRETE to room temperature or slightly above. Apply to the surface to be repaired within two minutes
of mixing. Force into any cracks or holes to be filled and strike off excess material, preferably with a tool wetted
with clean water.
For a smooth appearance of the cured compound, hand rub with water or a damp cloth prior to hardening.
Remove excess material before hardening begins. After 10-15 minutes the epoxy will begin to form a tenacious
bond. After just 60 minutes, INSTACRETE can be drilled, sawed, carved, sanded, stained, or painted.
CAUTIONS:
When mixing by hand, INSTACRETE does not cau