Service Repair Manual
436C BACKHOE LOADER
Product: BACKHOE LOADER
Model: 436C BACKHOE LOADER 9JN
Configuration: 436C Backhoe Loader Center Pivot, Single Tilt 9JN00884-01049 (MACHINE) POWERED BY 3054 Engine
Disassembly and Assembly
3054 Engine for Caterpillar Built Machines
Media Number -SENR6241-13
Publication Date -01/08/2008
Date Updated -04/08/2008
Fuel Injection Pump - Remove - Type 1 Engines and 9RM
SMCS - 1251-011
Bolt Remover (1)
Crankshaft Turning Tool
( 1 ) The bolt remover is required in order to remove the tamper proof bolts on the access cover for the fuel injection
A. Remove the water pump. Refer to Disassembly and Assembly, "Water Pump - Remove".
B. Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines
- Remove and Install".
Note: For a complete description of Type 1 and Type 2 engines, refer to the Disassembly and
Assembly, "Engine Design" topic.
Keep all parts clean from contaminants.
436C Backhoe Loader Center Pivot, Single Tilt 9JN00884-01049 (MACHINE) POWE...
Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Remove four bolts