Material Safety Data Sheet (MSDS)
SECTION 1 — CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
SECTION 2 — COMPOSITION, INFORMATION ON INGREDIENTS
Synonyms: aminobenzene, aniline oil
SECTION 3 — HAZARDS IDENTIFICATION
Call a physician, seek medical attention for further treatment, observation and support after first aid.
Inhalation: Remove to fresh air at once. If breathing has stopped give artificial respiration immediately.
Eye: Immediately flush with fresh water for 15 minutes.
External: Wash continuously with fresh water for 15 minutes.
Internal: Rinse out mouth, give 1 to 2 cups of water or milk, induce vomiting. After vomiting, give mixture of 2 Tbs. of activated
charcoal mixed with one cup of water. Call a physician or poison control at once.
SECTION 4 — FIRST AID MEASURES
SECTION 7 — HANDLING AND STORAGE
Avoid contact with eyes, skin and clothing. Wear chemical splash goggles, chemical-resistant gloves and chemical-resistant apron.
Use ventilation to keep airborne concentrations below exposure limits. Always wear a NIOSH-approved respirator with proper
cartridges or a positive pressure, air-supplied respirator when handling this material in emergency situations (spill or fire).
Exposure guidelines: TWA 5 ppm, (OSHA)
Colorless to brown, oily liquid. Slight benzene-like odor.
May be fatal if swallowed, inhaled or absorbed through skin. Severe eye irritant and mild sensitizer.
Serious health hazard.
Combustible liquid, moderately flammable.
SECTION 5 — FIRE FIGHTING MEASURES
Class III A Combustible liquid.
Moderately flammable when exposed to heat or flame. Heating to decomposition emits toxic NOx fumes.
Flash Point: 158 F UEL: 11% LEL: 1.3% Autoignition Temperature: 1139 F
Fire Fighting Instructions: Use triclass, dry chemical fire extinguisher. Firefighters should wear PPE
and SCBA with full facepiece operated in positive pressure mode.
SECTION 6 — ACCIDENTAL RELEASE MEASURES
Restrict unprotected personnel from area. Remove all ignition sources. Sweep up, place in sealed bag or