CLOR-D-TECT 1000 CHLORINE/HALOGEN TEST KIT
Material Safety Data Sheet
To comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 1 --- MANUFACTURER
Manufacturer's Name:
Emergency Telephone Number:
Dexsil Corporation
USA (800) 424-9300 (CHEMTREC)
INT'L (202) 483-7616
Address:
Telephone Number:
One Hamden Park Drive
(203) 288-3509
Hamden, CT 06517
Date Prepared:
12-17-07
Date Reviewed:
12-17-07
SECTION 2 — COMPOSITION/INFORMATION ON INGREDIENTS
The CLOR-D-TECT 1000 Chlorine/Halogen Test Kit consists of one test tube containing two ampules, one
test tube containing two ampules and an aqueous solution, and a separate ampule.
Component
Contents
CAS#
Concentration in kit
Ampule 1 (gray color, yellow-dot)
[Sodium]* dispersed in oil
7440-23-5
3.00%/[0.60%]*
Ampule 2 (large, colorless)
[Naphthalene]*
91-20-3
11.92%/[1.07%]*
in Ethyl Diglyme Sol’n
112-36-7
Ampule 3 (yellow-dot)
[Mercuric]* Nitrate
10045-94-0
6.55%[0.012%]*
in water
Ampule 4 (red-green)
Ethanol
00064-17-5
3.43%
Ampule 5 (colorless)
Organo-Sulfur Cmpd.
Proprietary
4.36%
Aqueous Sol’n
[Sulfuric Acid] *
7664-93-9
70.70%/[2.12%]*
in water
<0.05% Cadmium
7440-43-9
{*Bracketed component reported as a % of total liquid in kit}
SECTION 3 — HAZARDS IDENTIFICATION
Harmful if inhaled or swallowed.
May cause eye irritation.
May cause skin burns.
Ingestion will cause burns of the gastrointestinal tract.
For additional information on toxicity, please refer to Section 11.
SECTION 4 — FIRST AID MEASURES
First Aid
In case of contact with reagents, rinse well with water. In case of inhalation, remove to fresh air.
Eye Contact
For all kit components, flush eyes with large amounts of water for 15 minutes. Seek medical attention.
Skin contact
Flush with large amounts of water. Use soap and water to wash away organic components.
Inhalation
In case of inhalation, remove to fresh air.
SECTION 5 --- FIRE AND EXPLOSION HAZARD
Flash Point
Ampule 1
NA
Ampule 2
162oF
Ampule 3
NA
Ampule 4
48oF
Ampule 5
NA
Flammable Limit Unknown
Extinguishing Media DO NOT US