Home Epson Epson Wf 2850
Download Driver and Manual
Epson Wf 2850 Setup
Epson WF 2850 setup printer is a wireless inkjet All-in-One printer that supports the printing,
copying, scanning, and faxing functions. To know how to set up the Epson WF 2850 printer, refer to
the quick steps given on this web page.
Check if all the following components are present inside the box.
Take out the protective and packing materials from the outside of the Epson WF
Lift-open the scanner unit, remove all the protective materials, and close the
scanner unit of the Epson WF 2850 printer.
Take the power cord and insert it into an electrical outlet.
The other end of the power cord needs to be inserted into the rear port of the
Epson WF 2850 setup printer.
Open the printer’s control cover, find the Power button, and hold it until the
Power LED turns on.
This will power up the Epson WF 2850 printer.
Now, the LCD panel of the printer prompts to set a language, country, date, and
Once done, open the printer’s scanner unit.
Gently shake a new black ink cartridge and unpack it.
Make sure to peel off the yellow tape from the new black ink cartridge.
Place and push the black ink cartridge in the cartridge holder.
You will hear a lock sound only if the black ink cartridge is placed in the holder
Do the same to place the rest of the ink cartridges (cyan, magenta, and yellow)
in the holders correctly.
Lower the scanner unit of the Epson WF 2850 printer.
Perform the steps that display on the LCD panel of the printer to begin the ink
The ink charging process might take up to a maximum of six minutes.
Note: Do not turn off the Epson WF 2850 printer while the ink is charging.
If needed, adjust the print quality as per the LCD panel instructions.
Take out the rear paper support, move the edge guides, and load enough paper
into the paper support.
Make sure to adjust the edge guide. This will fit the paper correctly in the paper