Service Repair Manual
Models
325C, 325C L and 325C LN
Excavator
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325C EXCAVATOR CSJ
Configuration: 325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
325C Excavator Machine Systems
Media Number -RENR5367-11
Publication Date -01/01/2012
Date Updated -17/02/2017
i01734747
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Start By:
A. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor to a suitable holding fixture in a vertical position. The weight of the
travel motor is 60 kg (132 lb).
3. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
1/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
Illustration 1
g00510326
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
4. Remove bolts (1) .
5. Remove head (2) from the body of the travel motor.
Illustration 2
g00510341
2/9
325C L & 325C LN Excavator CSJ00001-UP (MACHINE) POWERED BY 3126 Eng...
2020/7/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?