Section 1 — Chemical Product and Company Identification
Section 2 — Composition, Information on Ingredients
Synonym: ammonium molybdate (VI) tetrahydrate
Section 3 — Hazards Identification
Call a physician, seek medical attention for further treatment, observation and support after first aid.
Inhalation: Remove to fresh air at once. If breathing has stopped give artificial respiration immediately.
Eye: Immediately flush with fresh water for 15 minutes.
External: Wash continuously with fresh water for 15 minutes.
Internal: Give large quantities of water. Call a physician or poison control at once.
Section 4 — First Aid Measures
Section 7 — Handling and Storage
Avoid contact with eyes, skin and clothing. Wear chemical splash goggles, chemical-resistant gloves and chemical-resistant apron.
Use ventilation to keep airborne concentrations below exposure limits. Always wear a NIOSH-approved respirator with proper
cartridges or a positive pressure, air-supplied respirator when handling this material in emergency situations (spill or fire).
Exposure guidelines: PEL, TLV: 5 mg (Mo)/m3 (ACGIH, OSHA)
White odorless powder.
Moderately toxic by ingestion. Irritating to skin and eyes. Avoid body tissue contact. Avoid breathing
dust. Exposure can cause vomiting and muscular uncoordination.
Section 5 — Fire Fighting Measures
Non flammable solid.
When heated to decomposition, emits toxic fumes of NH3 and NOx.
Fire Fighting Instructions: Use triclass, dry chemical fire extinguisher. Firefighters should wear PPE
and SCBA with full facepiece operated in positive pressure mode.
Section 6 — Accidental Release Measures
Restrict unprotected personnel from area. Remove all ignition sources and water . Sweep up, place in sealed bag or container and
dispose. Ventilate area and wash spill site after material pickup is complete. See Sections 8 and 13 for further information.
Section 8 — Exposure Controls , Personal Protection
Flinn Suggested Chemical Storage Pattern: Inorganic #8. Store with