Tenda F3 Router Setup - Quick Steps
Do you wish to set up a wired or wireless network in your home using the Tenda F3
router ? Have a quick look at the steps provided on this page to set up your network.
The smart Wi-Fi router, Tenda F3 router setup has three external antennas to ensure
hassle-free wireless connectivity over your network.
The router package consists of:
Tenda F3 router
Once you have unpacked the product package, perform the steps given below.
Step 1: Hardware Connection
First, turn on the router by plugging it into a power outlet using the supplied power
Connect a network cable between the blue WAN port of the Tenda router and
your Internet modem.
Using another network cable, connect the yellow LAN port of the router to the
Ethernet port on your computer for Tenda F3 router setup.
Now, check the LED lights on the router after connection. Make sure that the SYS
light on the router is blinking.
If your computer supports Wi-Fi, then you can connect it to the router’s Wi-Fi using
the router’s default SSID and network password. In this case, there is no need for
the Ethernet cable connection.
Step 2: Configure The Router
Launch a web browser on your computer to navigate to the Tenda router
Now, enter 192.168.0.1 (IP address of the router) in the address bar and hit the
The username and password of the Tenda router is admin. Enter the login
credentials and click on the Login button.
Now, you will be on the home page of the Tenda router.
When the Welcome to Setup wizard Next button.
Select your Internet Type and fill in the required details. Click on the Apply
Now, click System status on the left panel. Verify the connection status if it is
If the connection status displays disconnected, check if the modem and
router are properly connected.
If the status shows connecting, click on the Refresh button.
Verify the system status in the m