Flat sawing is used by concrete cutters to saw horizontal
surfaces. The saw operates at a frequency of 400 Hz and is
used to cut asphalt and cement sheets up to 24 inches thick.
Floors, expansion joints, pavement, and bridge decks are all
cut with flat saws, also known as slab saws. The device may
also be used indoors in addition to cutting concrete. In
comparison to a traditional saw, the amount of dust created
is quite low.
Wall sawing is done on a variety of surfaces, both
horizontally and vertically. This type of sawing is used to
create a door or window opening. Elevators and
stairwells are also constructed using wall sawing. This is
ideal for working on masonry and concrete structures. It
has a 37-inch penetration range. This saw can only be
used by experienced experts. Wall saws are utilised in
areas where flat saws are neither comfortable or safe to
operate. They may also be used to add a final touch to
Curb cutting is one of the types of industrial cutting used to
create a curb for easy access to and from the sidewalk. The
cuts are designed to make it easier for people to get on and
off the sidewalk. This also benefits those who use
wheelchairs, strollers, or skateboards on the sidewalk.
Perks of concrete cutting
● Concrete cutting is a comparatively quiet process when compared to
traditional demolition. If concrete cutting is taking place, you will not be
disturbed by the noise.
● Traditional demolition is known for producing a lot of dust and damaging
the environment. Many concrete cutting companies use a dust-free wet
technique. Many concrete cutting devices can remove huge chunks of
concrete without the need for clean-up.
● One of the primary advantages of concrete cutting is that we can
complete most tasks in a very short amount of time. You can't afford any
downtime on the job site while you are on a tight schedule.
Disclaimer : This is a generic Information & post; content abo