ARCHITECTS' AND ENGINEERS'
The power supply unit(s) shall be Alpha Communi-
cations®/Golmar model FA-PLUS, or approved
equal. The FA-PLUS shall be built into a rugged high
impact ABS plastic case, and shall be powered by a
standard 110VAC electrical outlet. Contractor shall
furnish the proper number of FA-PLUS units, de-
pending upon system capacity.
Low voltage wiring shall be used and positive screw
terminal and plug-in connectors shall be provided for
installation wiring. The FA-PLUS shall be mount-
able right to the surface of the wall or in a customer-
supplied junction box cabinet.
Contractor shall observe all local and national elec-
trical and building codes.
Copyright© 2010, Alpha Communications®, All Rights Reserved
42 Central Drive • Farmingdale NY 11735-1202 • Phone (631) 777-5500 • Fax (631) 777-5599
TOLL-FREE 1-800-666-4800 • Web: www.AlphaCommunications.com • Email: firstname.lastname@example.org
Power Supply Unit
The Alpha Communications®/Golmar FA-
PLUS power supply unit is used only with the
Platea and/or Szena series intercom and/or
video-intercom systems. The FA-PLUS pro-
vides the intelligent circuitry needed to con-
trol the video-intercom system functions.
Each FA-PLUS gets its power from a standard
110VAC plug-in electrical connection. All
FA-PLUS field connections are positive screw
terminal type, or plug-in type.
Each Platea and/or Szena series system re-
quires a minimum of one FA-PLUS power
• Easily Installs Right on Finished Wall Surface or in
Optional Junction Box
• Operates on Safe Low-Voltage Class II Wiring
• Positive Screw Terminal and Plug-in Connectors
Height: 3.55" (91mm)
Width: 4.22" (108mm)
2.45" (63mm) from mounting
Construction: High impact Grey ABS plastic case
Positive screw terminal and plug-in
Surface-mounted (usually installed near
the system amplifier/power supply and
other system central equipment).
Power Supply Unit